Vacuum Chamber Configurations

Plate Vacuum ChambersCylindrical Vacuum ChambersSpherical Vacuum ChambersMonocopue Vacuum Chambers

tekst

Plate Vacuum Chambers

Plate Vacuum Chambers

Plate Vacuum Chambers

Plate-to-Plate chambers are constructed using aluminium alloy plates. Chambers manufactured by this technique can be very large. Unlike stainless steel, Aluminium plate is available in very large areas. Off the shelf plate can be 1500mm x 3750mm. PM-PRECISION is able to supply even larger plates and chambers made from materials joined together. Plate thicknesses are selected according to vacuum deflection calculations. Large rectangular O-ring sealed access doors or polycarbonate windows can be included in the design.

PM-PRECISION has a wide experience in aluminium vacuum chamber engineering and manufacturing. With over 30 years experience in cutting-edge vacuum product design, PM’s prides itselve in providing the world’s finest and most advanced UHV aluminum chamber technology. PM’s aluminum vacuum chamber production techniques (Chamber Configurations) can be broken down into four basic categories:

  • Plate-to-Plate Chambers
  • Cylindrical Chambers
  • Formed Chambers
  • Monocoque Chambers

PM-PRECISION builds custom aluminium vacuum chambers employing these configurations, or combinations thereof. PM also manufactures and supply a wide range of aluminum vacuum components and accessory hardware to complement its aluminium vacuum chamber products offering.

 

Cylindrical Vacuum Chambers

Cylindrical Vacuum Chambers

Cylindrical Vacuum Chambers

Cylindrical chambers can be fabricated from standard tubes and pipes, or custom diameter aluminium roll-ups. An extensive selection of standard tube wall thicknesses is available. Tube and pipe wall thickness will be according to the diameter and schedule selected. Custom roll-up chambers are made from aluminium plate and are typically from an aluminium alloy. All cylindrical chambers can be made with minimum wall thicknesses because of the inherent strength offered by tubular geometry.

PM-PRECISION has a wide experience in aluminium vacuum chamber engineering and manufacturing. With over 30 years experience in cutting-edge vacuum product design, PM’s prides itselve in providing the world’s finest and most advanced UHV aluminium chamber technology. PM’s aluminium vacuum chamber production techniques (Chamber Configurations) can be broken down into four basic categories:

  • Plate-to-Plate Chambers
  • Cylindrical Chambers
  • Formed Chambers
  • Monocoque Chambers

PM-PRECISION builds custom aluminium vacuum chambers employing these configurations, or combinations thereof. PM also manufactures and supply a wide range of aluminium vacuum components and accessory hardware to complement its aluminium vacuum chamber products offering.

 

Spherical Vacuum Chambers

Spherical Vacuum Chambers

Spherical Vacuum Chambers

These chambers offer minimum internal surface area and radially mounted flange axes converge and focus to a central or strategic target point inside the chamber. Spun chambers can be very large—and size is only limited by spinning/forming equipment capacity. These chambers offer maximum strength and minimum wall thickness. Spherical and hemispherical Spun/Formed chambers are usually made form specific aluminium alloys.

PM-PRECISION has a wide experience in aluminium vacuum chamber engineering and manufacturing. With over 30 years experience in cutting-edge vacuum product design, PM’s prides itselve in providing the world’s finest and most advanced UHV aluminium chamber technology. PM’s aluminium vacuum chamber production techniques (Chamber Configurations) can be broken down into four basic categories:

  • Plate-to-Plate Chambers
  • Cylindrical Chambers
  • Formed Chambers
  • Monocoque Chambers

PM-PRECISION builds custom aluminium vacuum chambers employing these configurations, or combinations thereof. PM also manufactures and supply a wide range of aluminium vacuum components and accessory hardware to complement its aluminium vacuum chamber products offering.

 

Monocopue Vacuum Chambers

Monocopue Vacuum Chambers

Monocopue Vacuum Chambers

Monocoque chambers are machined from solid aluminium specific alloys billet or thick plate. Forged material is often used to eliminate the risk of vacuum leak paths entrapped by the billet forming process—other methods can use cast micro-structure aluminium. Aluminium is available in extremely thick plates (>1000mm). Monocoque chambers enable internal and external machining, which can provide a high concentration of design features, a minimum surface area and a maximum surface quality without weld oxide contamination. Precise component location is achieved, because these are controlled in a single machining setup and welding related distortion can be eliminated. Elaborate internal mounting brackets and shapes can be included in monocoque chamber designs.

PM-PRECISION has a wide experience in aluminium vacuum chamber engineering and manufacturing. With over 30 years experience in cutting-edge vacuum product design, PM’s prides itselve in providing the world’s finest and most advanced UHV aluminium chamber technology. PM’s aluminium vacuum chamber production techniques (Chamber Configurations) can be broken down into four basic categories:

  • Plate-to-Plate Chambers
  • Cylindrical Chambers
  • Formed Chambers
  • Monocoque Chambers

PM-PRECISION builds custom aluminium vacuum chambers employing these configurations, or combinations thereof. PM also manufactures and supply a wide range of aluminium vacuum components and accessory hardware to complement its aluminium vacuum chamber products offering.

© 2018 | PM-GROUP Webdesign: StandOut Reclame